 |
 |
 |
|||||||
 |
 |
|
|||||||
 |
 |
||||||||
 |
|
|
|
|
|
|
|
||
|
Ordering InformationPlease contact us or call (781) 963-7200 for additional order information.
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
cPCI
Products
 |
Download Open Frame Test Unit datasheet |
 To view the datasheet, you will need Adobe Reader. A
free version can be downloaded
here. |
|
Ordering Information
Please contact us or call (781) 963-7200 for additional order information.
(click to enlarge)
901
Series 1U MicroChassis for CompactPCI
The 901 series MicroChassis is a versatile turnkey unit designed for the latest generation of high performance processors in microcomputing, telecommunications, military and industrial environments.
Key Features
- IEEE1101.10 and IEEE1101.10 compliant
- All steel housing construction and stainless steel hardware design is ideal for harsh environment applications
- 901 series extruded aluminum cardguides
- 300watt PICMG 2.11 compliant plug-in power supply
- Durable black powder coat finish
- Push/Pull cooling via eight 11.78cfm fans
|
Download the 901 Series Enclosure MicroChassis datasheet |
| To view the datasheet, you will need Adobe Reader. A
free version can be downloaded
here. |
|
Ordering Information
Please contact us or call (781) 963-7200 for additional order information.
(click to enlarge)
CompactPCI
Card Frames / Card Cages
901 Series Card Frames
This new series of card frames is based on 901 Series aluminum guide clusters, which are a direct replacement for conventional plastic guides. These patented card frames/card cages are strong, durable, and rugged assemblies that meet IEEE1101.10 and IEEE1101.11 specifications. Fully compliant with all cPCI and PXI standards, the 901series card frames support all keying, ESD, alignment pin and EMI features.
Triple*Ease™ 901 series card frames are available in a broad range of configurations. The front extrusion injector / ejector lip comes standard in aluminum or can be ordered with an optional stainless steel plate for extra strength and virtually unlimited insertion / extraction cycles. The stainless steel injector / ejector lip is recommended for 9U tall PCB’s and cards deeper than 220mm.
Key Features
- Monolithic extruded aluminum card guides to any length from 60mm to 400mm
- Screw attachment to front and rear rails
- Rails have two tapped holes each end
- Powder coat finish over clear chromate
- Lifetime warranty against breaking
- Interchangeable with most plastic guides
Benefits
- Provides an un-interrupted board guide
- Greater shock and vibration resistance
- Eliminates rotation of rails during board insertion
- Highly durable and environmentally safe
- Design integrity
- Increased rigidity and longer life
|
Download the 901 Components datasheet |
| To view the datasheet, you will need Adobe Reader. A
free version can be downloaded
here. |
|
MaxAir.10™ Card Frames
MAXAIR.10™ card frames are based on the unitized construction pioneered by Triple E. They are ideal for rugged commercial, industrial and military applications. The robust design provides up to 30% more area between card guides for improved cooling performance. In addition to the enhanced CONVECTION cooling, the all aluminum construction also provides the circuit boards a heat CONDUCTION path not possible with plastic card guides. No plastic means no flexing, bending or breaking of card guides with better shock and vibration performance.
NO ASSEMBLY REQUIRED – the fully assembled card frames are available in all standard cPCI and PXI configurations from 3 to 21 slots with circuit card depths from 160mm to 400mm. Optional IEEE1101.11 compliant transition module available for 80mm cards (other sizes supplied on special order).The all extruded aluminum construction permits endless possibilities for custom non-standard variations. See ordering information for standard sizes. Contact factory for custom requirements.
Key Features
- Monolithic extruded aluminum card guides
- Press fit guide to rail assembly
- Powder coat finish over clear chromate
- Interchangeable injector / ejector plates (aluminum and stainless steel)
Benefits
- Provides an un-interrupted board guide
- Will meet MIL-STD-901 and MIL-STD-167
- Highly durable and environmentally safe
- Offers greater application flexibility
(click to enlarge)
CompactPCI
Card Guide Clusters / Decks
901 Series Card Guide Clusters
Patented Triple*Ease™ 901 series card guide clusters and decks are strong, durable, and rugged assemblies that meet IEEE1101.10 and IEEE1101.11 specifications. Fully compliant with all VME64x, VPX, and cPCI standards, the 901series card guide system supports all keying, ESD, alignment pin and EMI features. Available in 1 slot card guide pairs (top/Bottom) , the Triple*Ease™ 901 series card guides come in several standard colors including green (power supply), red (CPU) and smooth aluminum (I/O). Exposed surfaces are powder coated to provide a scratch resistant protective coating. These guide clusters can be assembled onto many other front and rear rail assemblies for “ruggedized “ applications.
Triple E guide deck assemblies with 901 series card guide clusters are available in a broad range of configurations. The front extrusion injector / ejector lip comes standard in aluminum or can be ordered with an optional stainless steel plate for extra strength and virtually unlimited insertion / extraction cycles.
Key Features
- Extruded card guides to any length from 60mm to 400 mm
- Screw attachment to front & rear rails
- Rails have two tapped holes each end
- Powder coat finish over clear chromate
- Interchangeable with most plastic guides
Benefits
- Provides an un-interrupted board guide
- Greater shock and vibration resistance
- Eliminates rotation of rails during board insertion
- Highly durable and environmentally safe
- Design integrity
- Easy conversion for ruggedized application
|
|
| To view the datasheet, you will need Adobe Reader. A
free version can be downloaded
here. |
|
901 Series Card Guide Deck
Patented Triple*Ease™ 901 series card guide decks are strong, durable, and rugged assemblies that meet IEEE1101.10 and IEEE1101.11 specifications. Fully compliant with all VME64x and cPCI standards, the 901series guide deck system supports all keying, ESD, alignment pin and EMI features.
Designed using 1, 2, 3 or 4 slot extruded aluminum guide clusters. Exposed surfaces are powder coated to provide a scratch resistant protective coating.
Triple E guide deck assemblies with 901 series card guide clusters are available in a broad range of configurations. The front extrusion injector / ejector lip comes standard in aluminum or can be ordered with an optional stainless steel plate for extra strength and virtually unlimited insertion / extraction cycles. The stainless steel injector / ejector lip is recommended for 9U tall PCB's and cards deeper than 220mm.
|
Download the 901 Series Card Guide Deck datasheet |
| To
view the datasheet, you will need Adobe Reader. A free
version can be downloaded
here. |
|
MaxAir.10™ Guide Decks
MaxAir.10™ guide decks are ideal for rugged commercial, industrial and military applications. The robust design provides up to 30% more area between card guides for improved cooling performance. In addition to the enhanced CONVECTION cooling, the all aluminum construction also provides the circuit boards a heat CONDUCTION path not possible with plastic card guides. No plastic means no flexing, bending or breaking of card guides with better shock and vibration performance. NO ASSEMBLY REQUIRED – the fully assembled guide decks are available in all standard VME64x and cPCI configurations from 2 to 27 slots with circuit card depths from 60mm to 400mm. The all extruded aluminum construction permits endless possibilities for custom non-standard variations. See ordering information for standard sizes. Contact factory for custom requirements.
Features
- Monolithic extruded aluminum card guides
- Press fit guide to rail assembly
- Powder coat finish over clear chromate
- Interchangeable injector / ejector plates (aluminum and stainless steel)
Benefits
- Provides an un-interrupted board guide
- Will meet MIL-STD-901 and MIL-STD-167
- Highly durable and environmentally safe
- Offers greater application flexibility
(click to enlarge)
(click to enlarge)
(click to enlarge)
CompactPCI
Front Panels
Triple E manufactures and assembles a full line of front panels that meet IEEE1101.10 and 1101.11 specifications. Patented EZ-Mount™ PCB mounting blocks are extruded into the panel, eliminating parts and simplifying assembly. Triple*Ease™ panels are machined, finished and assembled per customer specifications. When fitted with Triple E’s unbreakable all metal handles, the final assembly will provide years of dependable service and is backed by Triple E’s lifetime warranty against handle breakage.
Key Features and Benefits
Panel: |
Extruded aluminum eliminates the bowing common with cold rolled sheet metal. |
PCB Mounting: |
Integral to the panel extrusion, EZ-Mount™ PCB mounting blocks can be machined wherever needed in the vertical direction with VME spacing of 0.154” from front panel left edge. Reduces parts count and simplifies assembly. In single handle 3U applications, eliminates the need for a hole through the panel for the upper PCB mounting block. Double width (8HP) panel extrusion with integral mounting for a second PCB per the VME specification is also available. |
EMI Gasket: |
Triple*Ease™ shielded cPCI panels are available with Nickel plated BeCu EMI gaskets which provide optimum shielding effectiveness. |
ID Labels: |
Permanently bonded to solid metal handle surface with self-stick adhesive. Can be printed with logos, part numbers or other text. |
Finish: |
Durable powder coat finish is available in several standard colors. Can withstand 1,000 hours salt spray. Optional brushed finish with Iridite or anodize finish is also available. |
|
Download the 1101.10 Front Panel Datasheet |
| To view the datasheet, you will need Adobe Reader. A
free version can be downloaded
here. |
|
CompactPCI
(IEEE1101.10) Handles
See how to easily assemble the LT Handle
Triple E offers the first all metal IEEE1101.10 handle, a significant improvement compared to conventional nylon handles. Extremely strong, Triple*Ease™ inject / eject aluminum handles are backed by a lifetime warranty against breakage. Unlike nylon handles, the solid metal design eliminates risk of out-gassing or burning in harsh or extreme environments. A stainless steel leaf spring will not wear out like conventional nylon types.
|
Download the 1101.10 Handles datasheet |
|
Download drawings in .STP format |
Custom Handles
With Triple E’s Patented all-metal extruded handles and our extensive in-house machining capability, the custom possibilities are virtually unlimited. Need a single handle to span multiple board widths and provide even insertion/extraction? Only Triple E handles are extruded and are available in single handle widths from 4HP to 16HP. Interference with components, connectors or front panel indicators?
Let Triple E custom build a handle to meet your exact requirements. Contact your sales representative today.
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
||
| 781 963 7200
voice 781 963 7203 fax |
358 North Street Randolph, Massachusetts 02368 |
|||||||
| Home | Site Users Guide | Privacy / Legal Statement | Contact Us | Site Map | ||||||||
| © 2004 Triple E Corporation. All rights reserved. |  |
|||||||