Panel:

Extruded aluminum eliminates the bowing common with cold rolled sheet metal.

PCB Mounting:

Integral to the panel extrusion, EZ-Mount™ PCB mounting blocks can be machined wherever needed in the vertical direction with VME spacing of 0.154” from front panel left edge. Reduces parts count and simplifies assembly. In single handle 3U applications, eliminates the need for a hole through the panel for the upper PCB mounting block. Double width (8HP) panel extrusion with integral mounting for a second PCB per the VME specification is also available.

Ejector Handles:

Solid aluminum extrusion with single, twin or QUAD cam construction have a minimum of 0.2" cam travel, allowing for straight and full removal of the PCB from backplane connectors. The twin cam reduces torque on the PCB/Panel assembly, which avoids warping or damage to the PCB. Handles can be customized for non-standard front panel widths.

EMI Gasket:

Triple*Ease™ shielded VME panels are available with Nickel plated BeCu EMI gaskets which provide optimum shielding effectiveness.

ID Labels:

Permanently bonded to solid metal handle surface with self-stick adhesive. Can be printed with logos, part numbers or other text.

Finish:

Durable powder coat finish is available in several standard colors. Can withstand 1000 hours salt spray. Optional brushed finish with Iridite or anodize finish is also available.

Panel:

Extruded aluminum with monolithic PCB center mount.

PCB Mounting:

Integral to the panel extrusion, PCB mounting blocks can be machined to fit wherever needed in the vertical direction per VME spacing of 0.154 from left edge. Reduces parts count and simplifies assembly. In single handle 3U applications, eliminates the need for a hole through the panel for the upper PCB mounting block. Double width (8HP) panel extrusion with integral mounting for a second PCB per the VME specification is also available.

Ejector Handles:

Triple E offers the first all metal IEEE 1101.10 handle. The extruded aluminum inject-eject handle will not bend or break under high insertion/extraction force. A stainless steel leaf spring ensures positive inject-eject movement and will not wear out. Choose from Standard or Low Profile handles which extend only 0.625”(16mm) from the front panel. Standard finish is smooth or textured black powder coat. Conform to IEEE requirements for ESD, keying and hot-swap.

EMI Gasket:

All Triple*Ease™ panels include a highly effective Nickel plated BeCu EMI gasket.

Text and Logos:

Identification and I/O text permanently silk screened onto the panel per customer specification. Custom self-adhesive handle labels are also available.

Finish:

Brushed finish with clear chem film (Chromate, Iridite, Alodine) is standard. Also available on request are anodize finish and Powder coating which is extremely durable (can withstand 1000 hours salt spray) and is available in a variety of textures and colors.